PRODUCTS

Check Out Our New 2023 Catalog!

Click Here!

JLG

POWER, VERSATILITY AND INNOVATION
It's what you expect from a world-leading equipment manufacturer. And what you get with the new family of JLG all-wheel-steer telehandlers. Building on the JLG tradition of engineering expertise and technological innovation, JLG telehandlers are equipped to meet more of your job site challenges. Higher capacities and extended reach heights give you the power to do more.

MODEL G5-19A

Max Reach: 10 ft. 4 in. (3.15 m)
Max Lift: 19 ft. (5.79 m)
Max Capacity: 5.000 lb. (2,268 kg)

MODEL G6-23A

Max Reach: 12 ft. 9 in. (3.89 m)
Max Lift: 22 ft. 7 in. (6.88 m)
Max Capacity: 6,600 lb. (2,994 kg)

MODEL G6-42A

Max Reach: 29 ft. (8.84 m)
Max Lift: 42 ft. (12.8 m)
Max Capacity: 6,600 lb. (2,994 kg)

MODEL G9-43A

Max Reach: 30 ft. 6 in. (3.15 m)
Max Lift: 43 ft. (13.11 m)
Max Capacity: 9,000 lb. (4,082 kg)

MODEL G10-55A

Max Reach: 42 ft. (12.8 n)
Max Lift: 55 ft. (16.76 m)
Max Capacity: 10,000 lb. (4,536 kg)

GRADALL

534D9-45

Rated Capacity
At 24" (610mm) load center, 9,000 lb. (4,082 kg)
Maximum Lift Height
45' (13.7m)
Frame Leveling
8 degrees
Lift Speed (boom retracted)
Empty 105 f.p.m. (32 m/min)
Loaded 97 f.p.m. (29.5 m/min)
Boom Speed
Extend 100 f.p.m. (30.5 m/min)
Retract 105 f.p.m. (32 m/min)
Travel Speeds (Fwd and Rev)
2WD 0-18 mph (29 km/hr)
4WD 0-6 mph (9.7 km/hr)

534D10-45

Rated Capacity
 At 24" (610mm) load center, 10,000 lb. (4,536 kg)
Maximum Lift Height
 45' (13.7m)
 Frame Leveling
 8 degrees
Lift Speed (boom retracted)
Empty 105 f.p.m. (32 m/min)
Loaded 95 f.p.m. (29 m/min)
Boom Speed
Extend 100 f.p.m. (30.5 m/min)
Retract 105 f.p.m. (32 m/min)
Travel Speeds (Fwd and Rev)
2WD 0-19 mph (30.6 km/hr)
4WD 0-6.5 mph (10.5 km/hr)

544D

Rated Capacity
At 24" (610mm) load center, 10,000 lb. (4,536 kg)
Maximum Lift Height
55' (16.8 m)
Frame Leveling
8 degrees
Lift Speed (boom retracted)
Empty 110 f.p.m. (34 m/min)
Loaded 100 f.p.m. (30.5 m/min)
Boom Speed
Extend 130 f.p.m. (40 m/min)
Retract 130 f.p.m. (40 m/min)
Travel Speeds (Fwd and Rev)
4WD & 2WD 6.5-19 mph (10.5-30.6 km/hr)


524D

Rated Capacity
Al 24 in. (610 mm) load center. 6.000 lb. (2.722 kg)
Maximum Lift Height
245 ft. (75 m) or 32 ft (92
Frame Levering
8 degrees
Lift Speed (boom retracted)
Empty, 121 (pm. (369 m/min); Loaded 793 tom. (242 mlmin)
Boom Speed
Extend 1075 tp.m. (328 nVmin) Retract 1312 (pm. (40 m/min)
Travel Speeds Forward and Reverse
4WD-2WD 7.5-16 mph (12-25.7 km/hr)
Operating Weight
With 48' (12 m) carriage and forks. 
524D-25 - 153201b (6,955 kg) 
 5240-3S - 15,926 lb. (7230 kg)
Drawbar Pull
Loaded 12,850 lbs. (5828 kg)
VIEW FULL SPECS

EZ GROUT

GROUT HOG

Features:
Extended discharge arm saves several feet of boom extension on your forklift.
Decreased head height allows pouring up close to bar joist on interior walls.
Reduces the possibility of workers walking under the machine when elevated.
Makes grouting from the scaffold side of the wall easier.
Will handle up to 1/2 inch aggregate with virtually no plugging.
Removable auger and hopper tilt allows for 15 minute clean up.
Unique swivel base allows grouting from all angles while eliminating extra forklift moves.

BOOGER HOG

Masonry Wall Scrubber
Power: 5.5A Milwaukee Drill (Although other drills will fit, we chose Milwaukee for dependability and durability)
Weight: 13.5 lbs w/Disc
Drive Shaft: 5/16" Diameter Steel
Disc Guard: Tight fitting 7 3/4" Aluminum guard for a 7" disc Allows better cleaning around corners and door frames.
Durability: Pivot on head with self-lubricating bronze bushings and a felt seal, swivel has a grease fitting for lubrication and rubber lip seal.
Service: (2) Grease fittings, Drill motor easily replaced if required. Motor brushes on drill accessible without disassembly. Revolutionize your jobsite today!
Make punch-out more efficient.
Keep more masons on the wall when one man and a Booger Hog TM can do the work of 4 to 5 men.
Wall Cleanup is Quicker and Easier!

HOG LEG

HL400 Features:
Works on any type block
Fastens through the head joints (no cutting of block required or anchor bolts to purchase)
Adjusts to any height wall
One to two man assembly
Convenient lockable storage rack to store all materials (fits in 8 ft. bed) avoids theft
Lightweight, heaviest piece weighs only 38 lbs
Kicker extension can be used for extra stability
Makes your jobsite safer and more productive

MUD HOG

MH-20 Features:
Large Capacity - Mix 6 to 7 bags in one batch
Adjustable Height - Labor loads below waist
No wheels to work around or maintain
Portability - Fork pockets accessible from all sides.
Empty weight 2160 lb.
Compact to fit in standard 8 ft. truck bed
Electric start, hydraulic drive, hydraulic dump
Reversible mixing paddles prevent clogging
Vertical paddles design cuts through material
Paddle angle prevents splashing out of drum
6 mixing blades to decrease batch time
Masticated blades provide longer wear
Cleaning - labor stands upright to clean
Also ideal for stucco, smaller precast batches
Ergonomic design lessens labor fatigue and backache
VIEW FULL SPECS

GROUT HOG

Hydraulic Powered GH-75
Hooks to auxiliary hydraulics of forklift
Empty weight 840 lb.
Capacity: max. 3/4 cubic yard per load
Unique swivel base system allows workers to reach 17 feet of wall quickly without moving forklift
Dispensing hose: 7' reinforced, collapsible hose (4'hose also available)
Unloads 3/4 cubic yards in approx. 2 1/2 minutes if ran continuously
Other applications: Delivers sand, dry material, etc.
VIEW FULL SPECS

EZG7

Product Specifications
Model: EZG7
Capacity-ft3(L): 70
Capacity-Bags : 11/210 2
Power Source*: Honda GX240
7.9HP(5.6kw)
Engine Starting: Manual Recoil
Drum Thickness: 3/16"
Forklift Pockets : Standard
Discharge Height: 21"
Load Height: 48"
Dump Action: Manual
Drive System: Chain
Dimensions: 73"Lx47"W x58"H
107" Lw/tongue
67" Hw/dump handle
Weight: 820lbs (371.9kg)
VIEW FULL SPECS

EZG9

Product Specifications
Model: E2G9
Capacity-ft3(L): 9.0
Capacity-Bags: 2 to 3
Power Source*: Honda GX240
7.9HP(5.6kw)
Engine Starting: Manual Recoil
Drum Thickness: 3/16"
Forklift Pockets: Standard
Discharge Height: 22"
Load Height: 53"
Dump Action: Manual
Drive System: Chain
Dimensions:  71"Lx47"W x67"H
104" Lw/tongue
73"Hw/dump handle
Weight:  895lbs(406.0kg)
VIEW FULL SPECS

KENNISON PLANK

DENSE INDUSTRIAL 65
SOLID SAWN SCAFFOLD PLANK
DI65 is the original scaffold plank that set the standard for our industry to follow. For over 25 years the quality of this product has remained constant. DI65 is graded not only to meet OSHA/ANSI standards, but to exceed them. Our plank are without a doubt the safest, most dependable scaffold plank on the market today. Call our sales team for delivered prices to your area on partial or full loads.
OSHA Stamp-
All our plank meet or exceed OSHA standards.
SERVICES AVAILABLE:
Continuous Branding
Plank are continuously branded with grade descrip-tion, customer name and "Meets OSHA standards". 
Clipped Corners
The corners are clipped to provide ease of handling and reduce end shearing.

WIRE-BOND

MASONRY & CONCRETE REINFORCING PRODUCTS
MASONRY CONSTRUCTION
From high-quality masonry systems to truss and ladder reinforcement designs, stone Anchors, veneer Anchors, and more, we sell the entire line of innovative Wire-Bond products.